Jim Podraza

Oak Park, IL

Desk Lantern
The Desk Lantern is copper foiled with black patina. I used the lantern kit from Glass Crafters to mount the three 7 by 10 panels. 3/16 steel rods reinforce the top and bottom of each panel and the three joints where the panels meet.

Dream Catcher
The Dream Catcher uses 3/16 lead H and U came. The feathers hang free on solder coated rings made from thin copper wire. The hoop is 9 in diameter.

Hummingbird
The Hummingbird is about 8 across. The outside edge is trimmed with 14 gauge copper wire. It is copper foiled with black patina.

School Bus
The School Bus uses 3/16 lead H came and 1/2 zinc U came. The school name above the front window of the bus is solder coated 14 gauge copper wire laid over the glass. The piece is 7 high by 11 long.

Table Lamp
The Table Lamp base is oak. The lamp shade is foiled with black patina. Each panel is 14 wide at the base, 2 wide at the top and 10 tall in the middle. 3/16 steel rods reinforce the bottom of each panel and the four joints where the panels meet.

Contact

Phone: 941 379-8333
Email: info@glasscrafters.com

Questions? Go ahead, ask them: